Model Type |
N/A Wireless Exit Stopper® Multifunction Door Alarm with 8-channel Receiver |
Housing Dimension |
N/A 1/8 in |
Housing Material |
N/A Polycarbonate |
Power Source |
N/A 12 to 24 Volts (V) DC Wired 9 Volts (V) DC Alkaline Battery |
Low Volume Warning Horn at 1 Foot (ft) |
N/A 95 dB |
High Volume Warning Horn at 1 Foot (ft) |
N/A 105 dB |
Standby Current |
N/A 10 µA |
Alarm Current |
N/A 200 mA |
Relay Contacts |
N/A Form C Dry 0-30 Volts (V) AC/DC, 1 Ampere (A) |
Operating Temperature |
N/A 0 to 45 ºC32 to 113 ºF |
Application |
N/A Theft Prevention |
Overall Width |
N/A 5.375 in137 mm |
Overall Height |
N/A 5.375 in137 mm |
Overall Depth |
N/A 2 in51 mm |
How It Works |
N/A If the protected door is opened, the electronic Exit Stopper® emits an ear piercing alarm for 30 seconds, 3 minutes or continuously (as preset by the user). A key operated override will silence the alarm and allow authorized exits. The unit can be set for a 15 second delay before arming or tripping. Exit Stopper® “Always Active” allows the key holder to reset the alarm, but does not allow the alarm to be turned off. Exit Stopper® is fitted with a 9 VDC alkaline battery. It is available in red or green for almost any type of door, mounting or installation, including remote placement of the alarm (not for outdoor use). |
Features |
N/A
|
Design |
N/A
|
Construction |
N/A
|
Installation |
N/A
|
Electronics |
N/A
|
Options |
N/A
Available in red or green. STI-6400WIR8 supervised wireless 433 MHz (with 8-Channel Receiver). Up to 1000 foot (line of sight) range. |
Accessories |
N/A
KIT-E06402: Magnet and reed switch with spacers KIT-L16200: Warning Door Alarmed" label KIT-6403: Remote horn to use in conjunction with all above exit alarm models STI-V34104: 4-Channel Voice Receiver STI-34108: 8-Channel Receiver" |
User Programmable Features |
N/A
105 Decibel (dB) High Volume for Warning Horn at 1 Foot: ON (Factory Settings) (JP2 - Alarm Volume Switch) 95 Decibel (dB) Low Volume for Warning Horn at 1 Foot: OFF (JP2 - Alarm Volume Switch) Duration- 30 Second Alarm: OFF (Factory Settings) (JP3 - Alarm Duration Switch) Duration- 180 Second Alarm: OFF (JP3 - Alarm Duration Switch) Duration- Continuous Alarm: ON (JP3 - Alarm Duration Switch) Duration- Annunciator Mode: ON (JP3 - Alarm Duration Switch) Duration- 30 Second Alarm: OFF (Factory Settings) (JP4 - Alarm Duration Switch) Duration- 180 Second Alarm: OFF (JP4 - Alarm Duration Switch) Duration- Continuous Alarm: ON (JP4 - Alarm Duration Switch) Duration- Annunciator Mode: ON (JP4 - Alarm Duration Switch) Trip- Immediate: OFF (Factory Settings) (JP5 - Trip Delay Switch) Door Prop Mode: ON (JP5 - Trip Delay Switch) Arming- Immediate: ON (Factory Settings) (JP7 - Arming Switch) Arming- 15 Second Delay: OFF (JP7 - Arming Switch) |