COMPANY HEADER
Request Information
If you are fed up with replacing your fire extinguishers, this sturdy, tamperproof, self-contained alarm is the answer. It has proven highly effective in helping stop theft, misuse or vandalism of fire extinguishers. Yet, it leaves the extinguisher accessible for emergencies and does not interfere with fire fighting in any way.
Unit of Measure

Specifications

Model Type

 N/A Fire Extinguisher Theft Stopper

Overall Panel Width

 N/A 5.375 in137 mm

Overall Panel Depth

 N/A 2 in51 mm

Power Source

 N/A 9 Volts (V) DC Alkaline Battery

Low Volume Warning Horn at 1 Foot (ft)

 N/A 109 dB

High Volume Warning Horn at 1 Foot (ft)

 N/A 112 dB

Low Volume Warning Horn at 3 Foot (ft)

 N/A 98 dB

High Volume Warning Horn at 3 Foot (ft)

 N/A 103 dB

Application

 N/A Theft Prevention

Approvals and Warranty

Warranty1 N/A 3 y

Industry Standards

 N/A European Conformity (CE) Approved Federal Communications Commission (FCC) and Industry Canada (IC) Compliant

How It Works

How It Works

 N/A If the protected fire extinguisher is moved from its normal position, the device emits a piercing alarm. Also, the highly visible stop sign design and the words "STOP, EMERGENCY USE ONLY" discourages wrongful use. The device is easy to install and a deactivation cable is supplied for ease in servicing the extinguisher. A 9 V DC alkaline battery is included.

Features

Features

 N/A
  • Highly visible "stop sign" design discourages wrongful use of extinguisher.
  • Deactivation cable provided for service by authorized personnel.
  • Three year guarantee against breakage of polycarbonate in normal use (one year on electromechanical and electronic components).
  • Wireless Now Available

Key Features

Design

 N/A
  • Compact design 5.375 in. (137 mm) in diameter and 2 in. (51 mm deep). Mounts easily next to extinguisher.

Construction

 N/A
  • Virtually indestructible polycarbonate housing.

Installation

 N/A For fire extinguishers housed in cabinets.

Electronics

 N/A
  • Sounds a powerful warning horn when activated, drawing attention in a hurry.
  • 9 V DC alkaline battery is provided.

Options

 N/A Remote powered 12 V DC model available for special applications (STI-6200R).
STI-6200WIR supervised wireless 433 MHz (8-Channel Receiver required). Operates up to 1000 Feet (ft) (line of sight).

Accessories

Accessories

 N/A KIT-18015-9: 6 in. Deactivation Cable used during service times
KIT-18015-RC: Replacement cable and crimp 16-18 in. long
STI-V34104: 4-Channel Voice Receiver
STI-34108: 8-Channel Receiver

Product Information

Product Information

 N/A This sturdy, tamper resistant, self-contained device helps prevent the theft or vandalism of fire extinguishers. Experience has shown its highly visible "stop sign" design is itself an effective deterrent. The device contains a 9 V DC battery (included), a selectable 95 or 105 dB horn and a unique steel cable operated switch mechanism. When the extinguisher is removed, the galvanized steel cable is pulled out of the alarm and the horn sounds.
  • Reduces theft of vital fire extinguishers
  • Reduces vandalism of fire extinguishers
  • Completely self-contained
  • Does not interfere with fire fighting in any way
  • Remote powered 9-12 V DC version available
  • 1 Three year guarantee against breakage of polycarbonate in normal use (one year on electromechanical and electronic)