Model Type |
N/A Life Ring Theft Stopper |
Housing Material |
N/A Polycarbonate |
Housing Dimension |
N/A 1/8 in |
Power Source |
N/A 9 Volts (V) DC Alkaline Battery |
Low Volume Warning Horn at 1 Foot (ft) |
N/A 95 dB |
High Volume Warning Horn at 1 Foot (ft) |
N/A 105 dB |
Cable Diameter |
N/A 1/8 in |
Cable Length |
N/A 16 to 18 in |
Cable Material |
N/A Galvanized Steel |
Alarm Current at 95 Decibel (dB) |
N/A 40 mA |
Alarm Current at 105 Decibel (dB) |
N/A 150 mA |
Recommended Operating Temperature |
N/A 32 to 120 ºF0 to 49 ºC |
| Warranty1 | N/A 3 y |
Application |
N/A Theft Prevention |
General Information |
N/A
|
Design |
N/A
|
Construction |
N/A
|
Installation |
N/A
|
Electronics |
N/A
|
How It Works |
N/A This Stopper uses a time-tested, steel cable operated switch mechanism that is activated when the cable is removed from the device. When the protected life ring is removed from its normal position, the device sounds a piercing 95 or 105 dB alarm. Immediate attention is drawn to the area and the prankster with either run before stealing the life ring or be caught. The highly visible stop sign design and "STOP - EMERGENCY USE ONLY" message on the unit’s faceplate serve as a deterrent itself. The sound of the alarm also helps draw attention to the area when a person is actually in need of the life ring. It is easy to install and all necessary screws, anchors and its 9 V DC battery power source are included. |