COMPANY HEADER
Print Back
Here is an inexpensive yet highly effective way to protect fire extinguishers and a wide range of equipment such as fire hoses, sprinkler shutoff valves, guns and medicine cabinets from theft. The device is compact, highly effective and extremely versatile. It does not interfere with fire fighting or use of the protected item in any way. Also, the simplicity of design contributes to its high degree of reliability.
Unit of Measure

Specifications

Model Type

 N/A Cabinet Alarm - Reed Switch Activation

Housing Material

 N/A Polycarbonate

Power Source

 N/A 9 Volts (V) DC Alkaline Battery

Operation

 N/A Steel Contact Clip Magnetic Reed

High Volume Warning Horn at 1 Foot (ft)

 N/A 105 dB

Alarm Current

 N/A 115 mA

Auto Reset

 N/A 3 min

Recommended Operating Temperature

 N/A 32 to 120 ºF0 to 49 ºC
Warranty1 N/A 1 y

Application

 N/A Theft Prevention

Cable Specifications

Cable Diameter

 N/A 1/8 in

Cable Length

 N/A 16 to 18 in

Cable Material

 N/A Galvanized Steel

Dimensions

Overall Width

 N/A 3.37 in

Overall Depth

 N/A 1 in

How It Works

How It Works

 N/A When used as a cabinet alarm, Mini Theft Stopper (STI-6254), is mounted next to the door or in the cabinet. The reed switch unit is mounted on the door jam and the matching magnet is mounted on the door across from the reed switch. When the protected cabinet door is opened the device sounds a 105 dB warning horn.

For a freestanding fire extinguisher or other freestanding equipment, Mini Theft Stopper (STI-6255), has a special clip that can be used in several ways. An extinguisher’s pull pin may be routed through the holes in both prongs of the clip, the clip is then held in place by the extinguisher’s seal and when the seal is broken to use the extinguisher, the alarm sounds. The steel clip can also be placed under any type of equipment. When the protected equipment is moved, the clip opens and the alarm sounds immediately.

Key Features

General Information

 N/A
  • Highly visible "stop sign" design discourages wrongful use of extinguishers.
  • Deactivation pin provided for service by authorized personnel.
  • Recommended operational range 32º to 120 ºF (0° to 49 ºC)
  • Does not interfere with lifesaving operations.

Design

 N/A
  • Compact design. It is 3.37 in. (86 mm) in diameter and 1 in. (25 mm) deep.

Construction

 N/A
  • Tough, ABS construction.

Installation

 N/A
  • Mounts next to extinguisher or in cabinet.
  • Easy to install with all screws and anchors included.

Electronics

 N/A
  • Three minute automatic reset upon activation.
  • Sounds a powerful 105 dB warning horn when activated, drawing attention in a hurry.
  • Self-contained 9 V DC alkaline battery is provided.

Accessories

Accessories

 N/A KIT-65 - Replacement Breakaway Tie Wraps (Qty. 5)

Product Information

Product Information

 N/A Mini Theft Stopper® has two versatile methods of activation. This flexibility of design and compact housing allows this multipurpose unit to protect equipment or cabinets of virtually any kind without sacrificing performance.

Reed Switch/Magnet Activation

Reed Switch/Magnet Activation

 N/A This method of activation is the reed switch and magnet which can be used to protect doors and cabinets, etc. The Mini Theft Stopper is mounted next to the door or in the cabinet, the reed switch mechanism on the door jam as shown below and the magnet is mounted on the door so that when it is closed it is in close proximity to the reed switch. When opened, the alarm will immediately activate.

Versatile Spring Steel Activation

Versatile Spring Steel Activation

 N/A A special spring steel clip offers a variety of possibilities. The clip may be used to protect free-standing fire extinguishers by routing the extinguisher's pull pin through the holes in both prongs of the clip, the clip is then held in place by the extinguisher’s breakaway seal. When the seal is broken to use the extinguisher, the alarm immediately sounds. The steel clip may also be placed under almost any type of equipment. When the protected device is lifted, the clip expands and the alarm will sound immediately. NOTE: If the extinguisher pin method is used, the State of California requires installation of pin seal by a licensed fire extinguisher contractor.

Note

Note

 N/A In moderate to high noise, a sound level check should be done (monthly) to verify audibility in all areas the unit is to alert. End user must verify the alarm and battery function every six months and replace battery annually or as required.
  • 1 One year guarantee against breakage of ABS housing in normal use and one year on electromechanical and electronic components.