Model Type |
N/A Emergency Chair Theft Stopper® |
Power Source |
N/A 9 Volts (V) DC Alkaline Battery |
Alarm Current at 95 Decibel (dB) |
N/A 40 mA |
Alarm Current at 105 Decibel (dB) |
N/A 150 mA |
Recommended Operating Temperature |
N/A 0 to 49 ºC32 to 120 ºF |
Low Volume Warning Horn at 1 Foot (ft) |
N/A 95 dB |
High Volume Warning Horn at 1 Foot (ft) |
N/A 105 dB |
Application |
N/A Theft Prevention |
| Warranty1 | N/A 3 y |
Cable Diameter |
N/A 1/8 in |
Cable Length |
N/A 16 to 18 in |
Cable Material |
N/A Galvanized Steel |
How It Works |
N/A If the protected chair is moved from its normal position, the device emits a piercing alarm. Also, the highly visible stop sign design and the words “STOP, EMERGENCY USE ONLY” discourages wrongful use. The device is easy to install and a deactivation cable is supplied for authorized maintenance of the chair or alarm. 9 VDC alkaline battery is included. |
General Information |
N/A
|
Design |
N/A
|
Construction |
N/A
|
Installation |
N/A
|
Electronics |
N/A
|
Product Information |
N/A
This sturdy, tamper resistant, self-contained device helps prevent the theft or vandalism of emergency chairs. Experience has shown its highly visible "stop sign" design is an effective deterrent. The device contains a 9 V DC battery (included), a selectable 95 or 105 dB horn and a unique steel cable operated switch mechanism. When the emergency chair is removed, the galvanized steel cable is pulled out of the alarm and the horn sounds.
|