Model Type |
N/A Defibrillator Theft Stopper® |
Power Source |
N/A 9 Volts (V) DC Alkaline Battery |
Alarm Current at 95 Decibel (dB) |
N/A 40 mA |
Alarm Current at 105 Decibel (dB) |
N/A 150 mA |
Recommended Operating Temperature |
N/A 0 to 49 ºC32 to 120 ºF |
Low Volume Warning Horn at 1 Foot (ft) |
N/A 95 dB |
High Volume Warning Horn at 1 Foot (ft) |
N/A 105 dB |
Deactivation Cable Length |
N/A 9 in228 mm |
Application |
N/A Theft Prevention |
| Warranty1 | N/A 3 y |
Cable Diameter |
N/A 1/8 in |
Cable Length |
N/A 16 to 18 in |
Cable Material |
N/A Galvanized Steel |
How It Works |
N/A The Defibrillator Theft Stopper incorporates a unique steel cable operated switch mechanism which sounds a powerful alarm when the cable is removed from the unit. Before use, the steel cable is permanently crimped around the handle of the AED. When the AED is removed from its normal position, the alarm will sound. The selectable 95 or 105 dB alarm can be very disturbing to potential thieves and will draw attention in a hurry. Alarm does not hinder access to the AED in any way and allows for proper use of the unit in a medical emergency. Reinserting the cable silences the alarm. |
General Information |
N/A
|
Design |
N/A
|
Construction |
N/A
|
Installation |
N/A
|
Electronics |
N/A
|